The PD140 turbo is one of the best bolt on turbo upgrade you can add to your 2006 MK5 Jetta MK5 with the 1.9 TDI BRM Volkswagen diesel engine. Free shipping in Canada is available on all our products.
The PD140 turbo, also known as the GTB1646mv is a 3rd generation Garrett turbo. The PD140 turbo was the stock turbo for the European PD140 1.9 TDI BMM engine. The PD140 turbo also eliminates the boost creep that the stock BRM turbo is known for. The GTB1646mv design will also allow for more exhaust flow and reduce the exhaust manifold pressure.
This turbo can act as a simple replacement, or can be accompanied with supporting mods if you are looking for more aggressive power goals. It will need tuning if you replace the stock turbocharger, for better performance and to remove the CEL the removed smart actuator will cause. This turbo also comes with an EGT port. If you don’t plan on using an EGT probe you can block it off with a drain plug.
The PD140 turbo is a bolt-on option. You will need to install a PD140 turbo braided steel oil feed line. It works with stock downpipe. It is fully balanced with an actuator that is precisely calibrated – ready to install.
Max safe Boost : 1.7 BAR or 24-25 PSI
Max power target : 150-160 bhp
Engine options : BRM
INCLUDED: 12 MONTHS WARRANTY
All our turbos are made in the EU from new quality components, except the turbine and compressor housing that are reman. All our turbochargers are fully balanced and the actuator is precisely calibrated. This turbocharger is ready for installation in your engine. If you have questions regarding fitment on your vehicle, if your engine code is not in the selection or any other inquiries: We ask you to please contact chat support and a team member will provide assistance as quick as possible.
Peter (verified owner) –
Finally got the turbo running on my TDI swapped Jeep and it is sounding great bolt-on direct fit